Skip to content

Explore Pneumatic Conveying Solutions For Canadian Paper And Forest Products

Paper and wood dust are highly combustible materials, necessitating special precautions during operations involving their generation or handling to minimize fire and explosion risks. Certain types of wood dust have also been linked to adverse health effects. Standards have been set for respirable dust from both soft and hardwood at 5 mg/m³ and for total dust at 15 mg/m³. A manufacturing environment free of dust enhances productivity, accuracy, and worker satisfaction.

In brief, dense phase conveying via pneumatic systems is a cost-effective and straightforward method for transporting dry bulk materials. These systems consist of a pressure vessel that utilizes compressed air to pump materials (such as powders, granules, or other dry bulk materials) through closed horizontal or vertical pipelines at low velocities, minimizing wear on both the pipelines and the products.

Cable conveyors serve as ideal partners for every stage of your project, from engineering to installation. They offer comprehensive solutions for pneumatic dense phase transportation and provide top-notch engineering and after-sales support services tailored to your factory’s specific pneumatic bulk material handling needs.

Dense phase pressure conveying systems utilize compressed air exceeding 1 Barg (with a range of 0.5 to 0.8 Barg possible, contingent on the powder type and conveying line) to propel materials from pressure vessels, transfer units, or pressure pots through a pipeline to their intended destination. Here, the separation of air and product is achieved through a simple, small filter, unlike the more intricate separation required in lean-phase pneumatic conveying systems.

With extensive experience in conveying a wide array of products, our customers can have complete confidence that their bulk material conveying system will deliver optimal performance tailored to their specific needs.

Pneumatic Dense Phase Conveyance for Ground-Handled Bulk Bag Unloading, Weighing, Batching, and Mixing of Bulk Materials

Certain materials with large particle sizes, high bulk densities, and extreme stickiness are unsuitable for pneumatic conveyance. These materials tend to form coatings on contact surfaces and may eventually block the conveying line. Therefore, the particles must be sufficiently fine, with no large clumps. For effective pneumatic conveyance, the materials must be 90% smaller than 1mm, and the moisture content must be less than 4-5%.

This system offers flexibility and simplicity in installation, allowing for routing almost anywhere in the conveying lines. It features a dust-free process and minimal degradation, with less than 5-6% loss. With only a few moving parts, maintenance is low. Additionally, it can incorporate automated processes and offers fast, low-cost installation. The system is fully guaranteed and operates quietly. It can be designed to accommodate any conveyance rate, providing a safer environment and cleaner handling space while reducing manpower requirements.

× WhatsApp Chat